Description
Moxa NPort 5600 Device Server (NPort 5610-16) – Moxa 16-port Device Server, 10/100M Ethernet, RS-232, RJ-45, 15KV ESD, 100V or 240V
16 serial ports supporting RS-232/422/485
Standard 19-inch rackmount size
10/100M auto-sensing Ethernet
Built-in 15 KV ESD protection for all serial signals
Easy IP address configuration with LCD panel
Choice of configuration methods: Web console, Telnet console, and Windows utility
Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
SNMP MIB-II for network management.
With the NPort 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network. Network Readiness for up to 16 Serial Devices. Only basic configuration is needed with the NPort 5600 to connect up to 16 serial devices to an Ethernet network. 19-inch Rackmount Device Server. NPort 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operation, maintenance, and administrative tasks. Real COM/TTY Ports. Real COM/TTY drivers are provided to make the serial ports on the NPort 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort drivers also support the RTS, CTS, DTR, DSR, and DCD control signals. LED Indicators to Ease Your Maintenance Tasks.
Other Moxa NPort 5600 Device Server models in stock now:
NPort 5610-16 NPort 5610-16-48V
NPort 5610-8 NPort 5610-8-48V
NPort 5630-16 NPort 5630-8
NPort 5650-16 NPort 5650-16- T
NPort 5650-16-M-SC NPort 5650-16-S-SC
NPort 5650-8 NPort 5650-8-M-SC
NPort 5650-8-S-SC NPort 5650-8-T
Network Direct –
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort 5600 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.